TYSIM পিলিং সরঞ্জাম CO।, LTD।  

 

- ছোট রোটার ড্রিলিং RIG এর নেতা!

বাড়ি পণ্যকাটিং অসিলেটর

1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008

সাক্ষ্যদান
ভাল মানের শিপিং রিগ মেশিন বিক্রয়ের জন্য
ভাল মানের শিপিং রিগ মেশিন বিক্রয়ের জন্য
আমি বললাম, আমার মনিব রাফায়েল, যিনি আপনার পণ্যকে খুব বেশি পছন্দ করেছেন, আশা করি আরও বেশি ব্যবসায়িক সহযোগিতার প্রয়োজন হবে, যেহেতু আমি আপনাকে বলছি যে আমার বসটি পণ্যটির সাথে খুব সন্তুষ্ট।

—— মিসেস বেথলেহেম

আমরা আপনার বিশ্বস্ত গুণমান এবং নিখুঁত পরিষেবা দ্বারা প্রভাবিত হয়। আমরা আপনার কোম্পানীর সাথে একটি ভাল ব্যবসা করার জন্য উন্মুখ হবে।

—— মিঃ উইন হোলিং

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন

1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008

চীন 1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008 সরবরাহকারী

বড় ইমেজ :  1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008

পণ্যের বিবরণ:

উৎপত্তি স্থল: Jiangsu, চীন
পরিচিতিমুলক নাম: TYSIM
সাক্ষ্যদান: ISO9001:2008
Model Number: KRT150

প্রদান:

Minimum Order Quantity: 1 set
মূল্য: Negotiation
Packaging Details: Nude Packing and One Wooden Case, Shipping--LCL
Delivery Time: 30-45 days
Supply Ability: 5 sets/month
Contact Now
বিস্তারিত পণ্যের বর্ণনা
Casing Diameter: 600/800/1000/1200/1500 mm Max. Operating Pressure: 32 Mpa
Max. Torque: 1500 kN.m Stroke: 450 mm
Max. Lifting Force: 2050 kN Clamping Force: 2200 kN
Counterweight: 10 t Rotation Angle: ±10°
Height Clamp: 650 mm Mainframe Pressure: 1050 kN
Balance Weight Pressure: 900 kN Overall Weight: 19000 kg
Width of Connection Box: 560 mm Overall Length: 4285 mm
Width of Tail: 1170 mm Height of Connection Box: 580 mm
Overall Height: 1780 mm

Casing Oscillator KRT150

 

One basic equipment for large bored pile construction which transfers the load of upper structure to the ground layer by mechanical excavation.

 

Large bored pile equipment for the foundation with round-shaped section

 

Excellent excavating/extracting ability with power pack.

 

Special treatment- Normalizing the whole upper clamping collar after welding finished in order to relieve the internal welding stress.

 

1. Description

 

Greater embedding pressure can be achieved by Casing oscillator instead of Casing Drive Adapter, Casing can be embedded even in hard layer.

 

Casing oscillator owns such merits as strong adaptability to geology, high quality of completed pile, low noise, no mud contamination, slight influence to former foundation, easy control, low cost, etc. It owns advantages in following geological conditions: instable layer, underground slip layer, underground river, rock formation, old pile, erratic boulder, quicksand, foundation of emergency and temporary building.

 

It is especially suitable for coast, beach, old city wasteland, desert, mountain area and the place surrounded by buildings.

 

2. Specifications

 

KRT150 Casing Oscillator Technical Specification
Casing diameter mm 600/800/1000/1200/1500
Max. Operating pressure Mpa 28
Max.torque KN.m 1500
Rotation angle o ±10o
Stroke mm 450
Max. lifting force KN 2050
Height of Mainframe mm 650
Overall weight Kg 19000
Mainframe pressure KN 1050
Balance weight pressure KN 900
Clamping force(clamp) KN 2200
Clamping force(sub clamp) KN 280
Width of connection box mm 560
Width of tail mm 1600
Width of base frame mm 2720
Overall length mm 4285
Height of tail mm 1170
Height of connection box mm 580
Connection box pin shaft stroke mm 60
Height of jaw mm 630
Height of mechanical fixture mm 1150
Overall Height mm 1780

 

 

3.Competitive Advantage

1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008

(1) Low purchase and transport costs for the shared utilization of rig pump instead of special pump truck.

(2) Low operation cost for the sharing of output power of rotary drilling rig, energy saving and environmental friendly.

(3) Ultra-large pull/push force up to 210t is supplied by lifting cylinder and the large can be achieved with added counter-weight to speed up construction.

(4) Dismountable counterweight from 4 to 10t as required.

(5) Reduction in transport cost for the counterweight is made of cast-in-place concrete.

(6) Work stably-combined action of counterweight frame and ground anchor fix the bottom of oscillator to the ground firmly and reduce the reaction torque generated by oscillator to rig.

(7) High working efficiency for the automatic casing oscillation after 3-5m casing-in.

(8) The distance between oscillator and rig can be adjusted conveniently due to bolt connections.

(9) Added anti-torsion pin of clamping collar to ensure 100% torque transfer to casing.

(10) 0.6-1.5m casing diameter with different clamping collar to meet customers’ needs.

 

 

 

4. Construction Photos

1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008

1500 kN.m Torque Small Casing Oscillator 2050 kN Max Lifting Force ISO9001:2008

যোগাযোগের ঠিকানা
TYSIM PILING EQUIPMENT CO., LTD

ব্যক্তি যোগাযোগ: Ms. Camilla

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)